0.卸载任何许可证服务器如果一个西门子SPLM安装：
如果原始人运许可证服务器是安装，使用“程序和功能”删除它
如果许可证服务器安装的SSQ，“作为管理员运行服务器_ remove.bat”
从许可证服务器文件夹
1.不安装许可证服务器从原始人运12.0.0 NX的安装媒体
2.安装或更新的solidsquad通用许可证服务器
如果solidsquad通用许可证服务器没有安装。
在计算机：
“solidsquad _ -解压的文件夹_从许可证服务器”
“universallicenseserver SSQ _ _核心释放。_ <日期>”到任何驱动器的根
X：\文件夹（C:\类，D，E：\路径等），因此会：
X：\ solidsquad _ _许可证服务器
解压的文件夹——“供应商”。
“universallicenseserver SSQ _ _模块_ siemensplm _＜＞发布日期。”
“solidsquad _ _许可证服务器”文件夹
作为管理员运行”或_安装_ update.bat”“solidsquad _ _从许可证服务器
等到它的文件夹和条件
-或-
如果solidsquad通用许可证服务器已经安装
但“释放日期universallicenseserver SSQ _ _核心_＜＞发布日期。”
是一个比安装更新，更新服务器的安装：
作为管理员运行”uninstall.bat”从“solidsquad _ _许可证服务器”
等到它的文件夹和条件
“solidsquad _ -解压的文件夹_从许可证服务器”
“universallicenseserver SSQ _ _核心释放。_ <日期>”到任何驱动器的根
X：\文件夹（C:\类，D，E：\路径等），因此会：
X：\ solidsquad _ _许可证服务器
解压的文件夹——“供应商”。
“universallicenseserver SSQ _ _模块_ siemensplm _＜＞发布日期。”
“solidsquad _ _许可证服务器”文件夹
作为管理员运行”或_安装_ update.bat”“solidsquad _ _从许可证服务器
等到它的文件夹和条件
-或-
如果发布日期”universallicenseserver SSQ _ _核心释放。_ <日期>”是不更新
但当我们安装一个发布日期
“universallicenseserver SSQ _ _模块_ siemensplm释放日期。_＜＞”是比一个新的安装，
siemensplm模块：更新
解压的文件夹——“供应商”。
“universallicenseserver SSQ _ _模块_ siemensplm _＜＞发布日期。”
“solidsquad _ _许可证服务器”文件夹
作为管理员运行”或_安装_ update.bat”“solidsquad _ _从许可证服务器
等到它的文件夹和条件
5.12.0.0 win64 install NX。在安装时，要求许可证服务器名称和端口输入localhost 27800 @
6.替换原程序> 12.0＜NX（默认文件夹C:\ Program Files \ \ SIEMENS NX 12.0）和周围的一
7.重新启动计算机
8。享受！
0. Uninstall ANY SIEMENS SPLM License Server if one is installed:
- If the original SPLM License Server is installed, use "Programs and Features"
to remove it
- If SSQ SPLM License Server is installed, run as Administrator the "server_remove.bat"
from the SPLM License Server folder
1. DO NOT install original SPLM License Server from NX-12.0.0 setup media!!!
2. Install or update the SolidSQUAD Universal License Server
If SolidSQUAD Universal License Server has never been installed
on the computer:
- unzip the "SolidSQUAD_License_Servers" folder from
"SSQ_UniversalLicenseServer_Core_<release-date>.zip" to any DRIVE ROOT
folder X:\ (like C:\, D:\, E:\ etc), so the path will be:
X:\SolidSQUAD_License_Servers
- unzip the "Vendors" folder from
"SSQ_UniversalLicenseServer_Module_SiemensPLM_<release-date>.zip"
to the "SolidSQUAD_License_Servers" folder
- As administrator run "install_or_update.bat" from "SolidSQUAD_License_Servers"
folder and wait until it completes
-- OR --
If SolidSQUAD Universal License Server is already installed,
but the release-date of "SSQ_UniversalLicenseServer_Core_<release-date>.zip"
is newer than the installed one, update the server installation:
- As administrator run "uninstall.bat" from "SolidSQUAD_License_Servers"
folder and wait until it completes
- unzip the "SolidSQUAD_License_Servers" folder from
"SSQ_UniversalLicenseServer_Core_<release-date>.zip" to any DRIVE ROOT
folder X:\ (like C:\, D:\, E:\ etc), so the path will be:
X:\SolidSQUAD_License_Servers
- unzip the "Vendors" folder from
"SSQ_UniversalLicenseServer_Module_SiemensPLM_<release-date>.zip"
to the "SolidSQUAD_License_Servers" folder
- As administrator run "install_or_update.bat" from "SolidSQUAD_License_Servers"
folder and wait until it completes
-- OR --
If the release-date of "SSQ_UniversalLicenseServer_Core_<release-date>.zip" is not newer
than the installed one but the release-date of
"SSQ_UniversalLicenseServer_Module_SiemensPLM_<release-date>.zip" is newer than the installed one,
update SiemensPLM module only:
- unzip the "Vendors" folder from
"SSQ_UniversalLicenseServer_Module_SiemensPLM_<release-date>.zip"
to the "SolidSQUAD_License_Servers" folder
- As administrator run "install_or_update.bat" from "SolidSQUAD_License_Servers"
folder and wait until it completes
5. Install NX-12.0.0 Win64. At setup when asked for license server port and name input 27800@localhost
6. Replace original <NX 12.0 program folder> (by default C:\Program Files\Siemens\NX 12.0) with cracked one
7. Reboot computer
8. Enjoy!
|
